How To Reset Oil Change Light On 2012 Ford Escape

Demonstration on the oil service light reminder procedure on a 2020 Ford Escape. Scroll to Vehicle and press the right arrow button.

Ford Escape Oil Change Light Reset After Oil Service

After a few seconds the screen should say service.

How to reset oil change light on 2012 ford escape. Find the option that says oil life then right arrow again. Took it back to the dealership. If the instrument cluster display reads Not Reset or Reset Cancelled carefully repeat the procedure.

Press and hold the RESET button for two seconds and release to reset the oil life to 100 and OIL LIFE SET TO 100 is displayed. Press and hold the RESET button for two seconds and release to reset the oil life to 100 and OIL LIFE SET TO 100 is displayed. Press and hold the OK button until a Reset Successful message appears.

Finally push down and hold the ok button. Its different than prior modelsyears. Do not start the engine.

Turn the ignition back to the ON position but do not start the engine. Turn key to the on position hold the accelerator and brake pedal down at the same time until massage says oil reset complete. The best way to reset a check engine light is to use a code scanner.

I had replaced the tps sensor and after a day the engine seems to have stopped the high idle and check the terminal make sure it is clean and tight if it is the slightest bit loose or dirty it will not make a good contact and wont turn over. Keep the accelerator and brake pedals fully pressed. Release the pedals and turn off the car.

Oil reset in prog Keep pressing down on the break and gas for about 25 seconds until the screen says service. After three seconds a message displays confirming the reset procedure is in progress. Hope this video helps.

Press both the break and gas pedals at the same time. Follow the instructions below to reset the Oil Change Required Light on your Ford Escape. Press the SETUP button repeatedly until you see OIL LIFE HOLD RESET NEW.

Press the reset button. Ford escape reset check engine light how to reset change engine oil on ford escape mercury mariner. Use the UP and DOWN arrow buttons to scroll to the Settings menu and press the RIGHT arrow to enter the submenu.

It should change to if new oil hold reset button. The 2013 ford escape has 18 problems reported for check engine light. Scroll to Oil Life and press the right arrow button.

Brian Eslick from How to Automotive takes you step-by-step through the process of resetting the oil change required light on a 2010 Ford EscapeWebsiteFor mo. Press and release the SETUP button to display Oil Life XXX Hold Reset New Press and hold the RESET button for 2 seconds and release to reset oil life to 100. Turn the ignition on without turning on the engine.

Press the SETUP button until the OIL LIFE XXX HOLD RESET NEW displays. Press the setup button until you see a message that says something like oil life XXX pres reset if new oil. How to reset the oil light on the Ford Escape if you have any questions feel free to leave a comment.

Switch the ignition on. Fully press the accelerator and brake pedals at the same time. To reset the oil life monitoring system do the following.

Turn the key to indicator. After 5 to 10 seconds a message will appear that says Reset Successful. Scroll to the Vehicle menu and press the RIGHT arrow.

Do not start the engine. Apply the parking brake and turn off the engine. Press both the gas and brake simultaneously for about 20 seconds.

The light first illuminated solid on september 16 2007. If the engine oil life is less than 10 the oil change required light will appear on the display. Turn the ignition to run one position before starting engine.

After 25 seconds a message displays confirming the reset procedure is complete. Turn the ignition key to the ON position Dont start the engine. You should see a message appear on the display that says the oil is.

12 people found this helpful. Step 2 Press and release the tripreset button repeatedly to cycle through the available on-screen options until the display reads OIL LIFE XXX HOLD RESET. For push button models push the Start button once with foot off the brake pedal to activate accessory position.

How To Reset The Engine Oil Change Light On The Ford Escape